RFM offers a full set of custom embedded wireless networking solutions like Zigbee wireless mesh sensor networks, RF modules, IC transceiver, IC transmitters and IC receivers. RFM, Inc. manufactures low power wireless and RF radio modules, wireless mesh nodes for distributed sensing on distributed sensor networks. Low Power radio, n../arrowband and short range devices, front end saw filters, active RFID, RFIC, coupled resonator filters, single silicon chips in the 70MHZ and 300-1000Mhz range.

Bookmark and Share



Click to Download
Short-Range Radio
Products Guide



Wireless Device
Selection Guide

DR3101

315 MHz Transceiver

Click here if you need additional technical information,
to inquire about samples or to discuss your custom needs.

Designed for Short-Range Wireless Data Communications Supports 2.4-19.2 kbps Encoded Data Transmissions 3 V, Low Current Operation plus Sleep Mode Ready to Use OEM Module
Click here if you need additional technical information,
to inquire about samples or to discuss your custom needs.

download data sheet Rev Date 10/23/02

  • Features
  • Specs
  • AppNotes
  • Software
  • Buy Now
The DR3101 transceiver module is ideal for short-range wireless data applications where robust operation, small size and low power consumption are required. The DR3101 utilizes RFM’s TR3001 amplifier-sequenced hybrid (ASH) architecture to achieve this unique blend of characteristics. The receiver section of the TR3001 is sensitive and stable. A wide dynamic range log detector provides robust performance in the presence of on-channel interference or noise. Two stages of SAW filtering provide excellent receiver out-of-band rejection. The transmitter includes provisions for both on-off keyed (OOK) and amplitude-shift keyed (ASK) modulation. The transmitter employs SAW filtering to suppress output harmonics, facilitating compliance with FCC Part 15 and similar regulations. The DR3101 includes the TR3001 plus all configuration components in a ready-to-use PCB assembly, excellent for prototyping and intermediate volume production runs.

   
Electrical Characteristics
Characteristic Symbol Minimum Typical Maximum Units
Operating Frequency fO 314.80 315.20 MHz
Modulation Type OOK
Data Rate 2.4 kbps
Receiver Performance (OOK @ 2.4 kbps)
Input Current 3 Vdc Supply IR 4.5 mA
Input Signal for 10-4 BER 25  C -100 dBm
Rejection ±30 MHz RREJ 55 dB
Transmitter Performance (OOK @ 2.4 kbps)
Peak Input Current 3 Vdc Supply ITP 12 mA
Peak Output Power PO 0.75 mW
Turn On/Turn Off Time tON/tOFF 12/6 us
Sleep to Receive Switch Time (100 ms sleep -85 dBm signal) tSR 200 us
Sleep Mode Current IS 0.75 uA
Transmit to Receive Switch Time (100 ms transmit -85 dBm signal) tTOR 200 us
Receive to Transmit Switch Time tRTO 12 us
Power Supply Voltage Range VCC 2.7 3.5 Vdc
Operating Ambient Temperature TA -40 +85 °C

Application Notes                                                                                                 see All Product Application Notes
White Papers
Mouser Avnet Digi-Key Future Electronics Xinkai Digital North America Countries

RFM products are sold through a world-wide network of manufacturer's sales reps and distributors.

Need a Quote & Availability?
First Name Last Name
Company Name
Email Address Phone
State (if in USA or Canada):
Country
Zip Code
Comments: