|
|
DM2200-916-DK
 |
Not for new design
916.50 MHz Development Kit
|
Click here if you need additional technical information,
to inquire about samples or to discuss your custom needs.
• Experience wireless mesh networking
out of the box, in minutes
• Rapidly prototype an application
• Quickly test alternative solutions
• Design in embedded capability
• Design using 916 or 434 MHz
• Long range, low power
Benefits:
• Speed time to market
• Develop an inexpensive solution
• Controls risks of new development
Click here if you need additional technical information,
to inquire about samples or to discuss your custom needs.
download
data sheet
Rev Date 04/18/08
|
- Features
- Specs
- AppNotes
- Buy Now
- End of Life
| The DM2200 Development Kits give you a way to get a wireless mesh networking application up
and running in minutes. The Development Kits are built around the RFM DM2200 Wireless
Modules for embedded low power mesh networking applications. With the DM2200-DK
Development Kits you can quickly and easily prototype and test an embedded wireless mesh
networking solution for your application, in either ETSI-certified 916 MHz frequency for European
markets or FCC- and IC-certified 434 MHz for the US and Canadian markets.
The DM2200 Module achieves a range of up to 600 meters outdoors with low power
consumption. It is ideal for applications that require long life operation on batteries. Based on the
RFM family of low power radios, the DM2200 uses a powerful and versatile mesh networking
protocol that can be tuned and optimized for specific applications. The DM2200-916-DK Development Kit contains everything needed to
prototype adding wireless connectivity to your product.
• Three (3) DM2200 Modules configured as end nodes to connect to your
product with serial, analog or digital I/O ports
• One (1) DM2200 Module configured as a base station
• Four (4) IM2200 Interface Boards that attach a DM2200 Module to
provide standard connectors to the DM2200’s standard I/O ports for
analog in, logic in, logic out, and serial I/O.
• Four (4) AC Power Adapters to provide external power for the IM2200
Interface Boards.
• Four (4) Battery Packs that can be used to power the IM2200 Interface
Board with a connected DM2200 Module without requiring an external
power adapter.
• One (1) USB Cable to connect the DM2200 base station in an IM2200
Interface Board to a PC via USB.
• Quick Start Guide to step you through setting up a working wireless
mesh network application in minutes.
• Quick Start CD that auto starts in your Windows PC and provides the
user interface for your first wireless mesh network application.
• Development Kit CD that contains detailed specifications, user guide,
utilities, sample programs, application notes, and other
documentation.
• Technical support is provided with the Development Kit to assist you
with the design, development, integration and certification of the
DM2200 with your product. |
|
|
|
|
Electrical Characteristics |
| Characteristic |
Symbol |
Minimum |
Typical |
Maximum |
Units |
| Channel Center Frequency |
fO |
|
916.5 |
|
MHz |
| Modulation Type |
|
|
OOK on BPSK Spreading Code |
|
|
| RF Encoded Data Transmission Rate |
|
|
9.6 |
|
kb/s |
| Receive Mode: |
|
|
|
|
|
| Average Input Current, 5 Vdc VIN Supply |
IR |
|
5.5 |
6.0 |
mA |
| Pulse Input Signal for 10-3 BER, 25 °C |
|
|
-100 |
|
dBm |
| Transmit Mode: |
|
|
|
|
|
| Peak Input Current, 5 Vdc VIN Supply |
ITP |
|
36 |
38 |
mA |
| Peak Transmitter Output Power |
PO |
|
10 |
|
dBm |
|
|
|
| Application Notes
see All Product Application Notes |
AN1800-1 2.3
DM1800 V2.2 and V2.3 Application Programming, provides an overall discussion of application software development for a DM1800 MESH network using V2.2 or V2.3 firmware, plus an example thermistor temperature sensor application. |
AN1800-1 2.4
DM1800 V2.4 Application Programming, provides an overall discussion of application software development for a DM1800 MESH network using V2.4 firmware, plus an example thermistor temperature sensor application. |
AN1800-2
DM1800 Poll, allows users to poll nodes, read and write to digital output and display input and output commands. |
|
|
|
|
|
|
|
|
AN1810-1 2.4
DM1810 V2.4 Application Programming, provides an overall discussion of application software development for a DM1810 MESH network using V2.4 firmware, plus an example thermistor temperature sensor application. |
AN1810-1 2.5
DM1810 V2.5 Application Programming, provides an overall discussion of application software development for a DM1810 MESH network using V2.5 firmware, plus an example thermistor temperature sensor application. |
AN2200-1
DM2200 Temperature Sensor Demonstration |
AN2200-2
DM2200 Sleep Duty Cycle Demonstration |
|
AN2200-4
ZN241G & DM2200 Remote Control Mesh |
ANM1001
A Solar Energy Harvester for Wireless Sensor Networks |
ANM1002
Sizing Solar Energy Harvesters for Wireless Sensor Networks |
|
|
|
|
| |
RFM products are sold through a world-wide network of manufacturer's sales reps and distributors.
| EOL Notice
The purpose of this End-of-Life Product Notice is to communicate the obsolescence of the DM2200.
REPLACEMENT PARTS. RFM will provide technical assistance to minimize customer resources and time required to
transition to an alternative product. RFM recommends the following replacement parts:
XDM2140 or LPR2430
LAST-TIME-BUY. Last-time-buy orders (LTB) will be accepted until February 1, 2010.
LTB purchase orders will be accepted based on product availability.
Buy from Mouser
Buy from Acal
Buy from Avnet
Buy from Digi-Key
Buy from Nu Horizons
TERMS. All orders will be non-cancellable, non-returnable and all shipments must be
complete by April 30, 2010. All last time buy orders are covered by the RFM standard One
Year Product Warranty.
Please contact local RFM Sales Rep or Distributor for additional information. |
|
|
|
Click to Download
