RFM offers a full set of custom embedded wireless networking solutions like Zigbee wireless mesh sensor networks, RF modules, IC transceiver, IC transmitters and IC receivers. RFM, Inc. manufactures low power wireless and RF radio modules, wireless mesh nodes for distributed sensing on distributed sensor networks. Low Power radio, n../arrowband and short range devices, front end saw filters, active RFID, RFIC, coupled resonator filters, single silicon chips in the 70MHZ and 300-1000Mhz range.

Bookmark and Share



Click to Download
RF Modules
Products Guide

RFM2M


Wireless Device
Selection Guide

DNT90C

 900 MHz Transceiver Module

Click here if you need additional technical information,
to inquire about samples or to discuss your custom needs.

• DNT90 Brochure

• 900 MHz Frequency Hopping Spread Spectrum Transceiver
• Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Store-and-Forward Repeating
• Transmitter Power of a full 150mW (+22dBm)
• RF Data Rate of 100 kbps
• Over-the-air module programming and configuration
• Auto reporting of module inputs
• 128-Bit AES Encryption
• Analog and Digital I/O for Sensor Applications
• FCC and Canadian IC Certified for Unlicensed Operation
• Australian limited 900 MHz band support
• Drop-in replacement for RFM LPR2430ER 2.4 GHz 802.15.4 modules
Click here if you need additional technical information,
to inquire about samples or to discuss your custom needs.

download data sheet Rev Date 11/29/10

download product manual

  • Features
  • AppNotes
  • Dev Kit
  • Buy Now
The DNT90 is a low cost, long range, multi-purpose, 900 MHz frequency hopping OEM RF module. The DNT90 provides a 100 kbps RF data rate with +22dBm RF power coupled with a receive sensitivity of -99dBm to provide exceptional range and performance all in an FCC and IC certified module that lists for $29. The DNT90 also provides a sub-band mode that meets Australian requirements.

Development Kit
Application Notes                                                                                                 see All Product Application Notes
    AN80201
    Wireless Temperature Sensor
    ANM1001
    A Solar Energy Harvester for Wireless Sensor Networks
    ANM1002
    Sizing Solar Energy Harvesters for Wireless Sensor Networks
White Papers
    Lightning and Surge Protection
    Because wireless systems are typically located out of doors and have components located on towers and tall buildings, they are especially susceptible to damage from lightning. This paper explores the proper design and implementation of a communications surge protection system to reduce down time and lower liability for people and property. (~ 152 KB, Adobe PDF format.)
    RF Power Options in ZigBee™ Solutions
    While ZigBee is a "low power" standard, "high power" product versions are much needed — and are very much ZigBee standard. This paper explains how the the availability of ZigBee radios with high and low RF power options is key to ZigBee's appeal in industrial settings, allowing design engineers to tie radio selection directly to an application’s requirements for range and resistance to multipath fading.
    WaveBolt System Description
    The WaveBolt™ system is a fixed wireless point-to-multipoint Internet access system designed specifically for residential and small business customers in areas where DSL and cable modem access are unavailable, unaffordable or otherwise undesirable. The WaveBolt system provides data speeds comparable to ADSL. Simple to install, the WaveBolt CPE in many cases will be installed by the end user. And, where customers choose to have the CPE installed, a single, short site visit is all that is required to complete the installation. (~ 162 KB, Adobe PDF format.)
    Wireless Communications for Industrial Applications
    This paper examines the unique requirements and challenges of wireless communications in an industrial setting and provides an overview of RFM wireless products designed specifically for these applications. The information presented serves as a guide for systems integrators and end users responsible for factory floor automation, industrial/PLC control, SCADA, telemetry and related data communications applications. (~ 136 KB, Adobe PDF format.)
    Wireless Transceivers—Make or Buy?
    In choosing to add wireless data capability to a new or existing product, every designer faces a critical decision: whether to engineer the functionality in-house or buy a ready-made module for the application. This paper provides a cost analysis to explore the relative merits of each approach. (~ 160 KB, Adobe PDF format)
    ZigBee Wireless Transceiver Engineering Options
    ZigBee's mesh networking capability, which compensates for obstructions and reduces range requirements, is especially prized in industrial applications. But with a technology this new, how can the RF designer best realize a successful ZigBee implementation? This white paper provides a brief, realistic assessment of ZigBees value in industrial environments, examines the types of components available today at the chip and module level, and discusses the practical considerations to be weighed in deciding to pursue ZigBee mesh networking in a specific application.
Case Studies
    Digital sign control
    A maker of commercial electronic signs chose RFM HopNet wireless serial modems to replace costly cabling runs.
    Heavy duty automation
    Wireless communications from databases to crane scales automate aluminum manufacturing.
    Parking control
    Upgrading a parking facility to monitor space availability without cutting cable trenches.
Developer Kits
The DNT90 Development Kit is available as part number: DNT90DK
The DNT90 is a low cost, long range, multi-purpose, 900 MHz frequency hopping OEM RF module. The DNT90 provides a 100 kbps RF data rate with +22dBm RF power coupled with a receive sensitivity of -99dBm to provide exceptional range and performance all in an FCC and IC certified module that lists for $29. The DNT90 also provides a sub-band mode that meets Australian requirements.
RFM Part   Frequency   Description  
DNT90DK
900 MHz
(2) DNT90 modules with pins, (2) DNT90 development boards, (2) USB cables, (2) Serial cables, Antennas and RF cables, Program CD with software and manuals, Quick start guide
Mouser Avnet Digi-Key Future Electronics Xinkai Digital North America Countries

RFM products are sold through a world-wide network of manufacturer's sales reps and distributors.

Need a Quote & Availability?
First Name Last Name
Company Name
Email Address Phone
State (if in USA or Canada):
Country
Zip Code
Comments: