RF Components - Frequency Control SC3046B-5 933.12 MHz SAW Clock - Diff Sine Wave - RFM offers a full set of custom embedded wireless networking solutions like Zigbee wireless mesh sensor networks, RF modules, IC transceiver, IC transmitters and IC receivers. RFM, Inc. manufactures low power wireless and RF radio modules, wireless mesh nodes for distributed sensing on distributed sensor networks. Low Power radio, n../arrowband and short range devices, front end saw filters, active RFID, RFIC, coupled resonator filters, single silicon chips in the 70MHZ and 300-1000Mhz range.

Click to Download
RF Components
Products Guide

SC3046B-5

933.12 MHz Clock - Diff Sine Wave

Click here if you need additional technical information,
to inquire about samples or to discuss your custom needs.

� Quartz SAW Frequency Stability
� Fundamental Fixed Frequency
� Very Low Jitter and Power Consumption
� Rugged, Miniature, Surface-Mount Case
� Low-Voltage Power Supply (3.3 VDC)
Click here if you need additional technical information,
to inquire about samples or to discuss your custom needs.

download data sheet Rev Date 05/19/04

download RoHS Statement

download Package Specs

Features
Specs
AppNotes
Buy Now

This digital clock is designed for use in high-speed communications timing systems. Fundamental-mode oscillation is made possible by surface-acoustic-wave (SAW) technology. The design results in low jitter, compact size, and low power consumption. Differential outputs provide a sine wave that is capable of driving 50 Ohm loads.


Electrical Characteristics

Characteristic	Symbol	Minimum	Typical	Maximum	Units
Output Frequency Absolute Frequency	fO	932.725		933.300	MHz
Variation over Temperature				70	ppm
Q and Q Output Voltage into 50Ohm (VSWR ? 1.2)	VO	0.5	3.0	6.0	dBm
Operating Load VSWR				2:1	VP-P
Symmetry		49		51	%
Harmonic Spurious				-30	dBc
Nonharmonic Spurious				-60	dBc
Start Up Time				30	us
Q and Q Period Jitter No Noise on VCC			15	30	psP-P
200 mVP-P from 1 MHz to � fO on				35	psP-P
Output (Disabled) Amplitude into 50 Ohm				75	mVP-P
Output DC Resistance (between Q & Q)		50			kOhm
ENABLE (Terminal 14) Input HIGH Voltage	VIH	VCC-0.1	VCC	VCC+0.1	V
Input LOW Voltage	VIL	0.0		0.20	V
Input HIGH Current	IIH		3	5	mA
Input LOW Current	IIL			-1	mA
Propagation Delay	tPD			1	ms
DC Power Supply Operating Voltage	VCC	+3.13	+3.30	+3.47	VDC
Operating Current	ICC		25	45	mA
Operating Ambient Temperature	TA	10		+60	�C