Murata Wireless

Bookmark and Share

Transceiver Modules Save Original Equipment Manufacturers (OEMs) money and time!

  • All Murata OEM modules come with FCC, IC and ETSI module certification as applicable. No FCC or ETSI-type acceptance testing required.
  • Each Murata transceiver module is treated just like other integrated circuits, with reflow soldering or connector pins for optional use.
  • Small size, there is no size penalty associated with the convenience of a module.

  • 802.11g
  • 802.15.4
  • FHSS Modules
  • FHSS Boxed Radios
  • WirelessHART

Wi-Fi SENSOR NETWORKING. The WSN802G is a 2.4 GHz IEEE 802.11g radio transceiver module that enables OEMs to build low-power wireless local area networking (WLAN) and sensor monitoring solutions for the global market.
802.11g Modules Developer Kits - Order Today 802.11g Industrial Bridges      
Designed for machine-to-machine applications developed for existing 802.11g networks
  • DSSS technology
  • Data Rate 11 Mbps
  • Range up to 1,000M

802.11g Transceiver Modules


INTEGRATES GAINSPAN SoC. The WSN802G RF module integrates the Gainspan GS1010 System on Chip (SoC).

EXCEPTIONALLY LOW-POWER PROFILE. The WSN802G delivers an exceptionally low power profile and long battery life capabilities in a fully functional, certified radio module that is easily interfaced to existing 802.11b/g infrastructure for a wide variety of sensor monitoring and WLAN applications.

SLEEP CAPABILITY. The Gainspan GS1010 SoC low average power consumption is obtained by putting the SoC to sleep between active periods. Depending upon the frequency of active periods, a single AA Lithium cell can provide a battery life in excess of 5 years. The module’s peak current consumption is about 150 mA, allowing a battery to adequately power the device.

I/O AND AUTO REPORT CAPABILITY. The WSN802G features Analog, Digital and Serial I/O with configurable automatic I/O reporting that includes interval timer, interrupt and ADC level triggers.

SAME FORM FACTOR. At 1.05 sq. inch footprint, the WSN802G has the same form factor as Muratas 802.15.4 LPR2430 series, wireless mesh XDM2140 series, and ZigBee ZMN2430 series modules.

SAME PINOUT as Muratas 802.15.4 LPR2430 series, wireless mesh XDM2140 series, and ZigBee ZMN2430 series modules.

FCC / IC / ETSI CERTIFIED. The WSN802G is certified for unlicensed operation in the USA, Canada and Europe.

Part   Frequency   Transmit Power   Data Rate   RF Conn/ Antenna Development Kit  
WSN802GC 2.4 GHz 10 mW 1-11 Mbps U.FL WSN802GDK
WSN802GC-E 2.4 GHz 10 mW 1-11 Mbps U.FL WSN802GEDK-A
WSN802GCA 2.4 GHz 10 mW 1-11 Mbps Chip Antenna WSN802GDK
WSN802GCA-E 2.4 GHz 10 mW 1-11 Mbps Chip Antenna WSN802GAEDK-A
WSN802GP 2.4 GHz 10 mW 1-11 Mbps U.FL WSN802GDK
WSN802GP-E 2.4 GHz 10 mW 1-11 Mbps U.FL WSN802GEDK-A
WSN802GPA 2.4 GHz 10 mW 1-11 Mbps Chip Antenna WSN802GADK
WSN802GPA-E 2.4 GHz 10 mW 1-11 Mbps Chip Antenna WSN802GAEDK-A

back to top

802.11g Developer Kits


Fast-track Your Designs...
Order Your Developer Kit Today!

Murata RF Modules Developer Kits include the technology hardware and software to support the development and integration of Murata RF Modules into any machine-to-machine (M2M) application.

Part   Description  
WSN802GADK The WSN802GADK Contains: 1 WSN802GPA module, 1 WSN802GPA development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide
WSN802GADK-A The WSN802GADK-A Contains: 1 WSN802GPA module, 1 WSN802GPA development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide AND wireless router
WSN802GAEDK-A The WSN802GAEDK-A Contains: 1 WSN802GPA-E module, 1 WSN802GPA development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide AND wireless router
WSN802GDK The WSN802GDK Contains: 1 WSN802GP module, 1 WSN802GP development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide
WSN802GDK-A The WSN802GDK-A Contains: 1 WSN802GP module, 1 WSN802GP development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide AND wireless router
WSN802GEDK-A The WSN802GEDK-A Contains: 1 WSN802GP-E module, 1 WSN802GP development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide AND wireless router

Industrial 802.11g Bridges
The HN-208 series is a versatile, low cost, multi-purpose 802.11g wireless data modem. The HN-208 has an integral 6dB patch antenna creating a "single piece" modem and is rated over the full -40C to +85C temperature range. The HN-208 communicates with existing 802.11g access points, and supports peer-to-peer links as well. The HN-208 is available in three separate versions offering an Ethernet connection, an RS-232 serial connection, or a single I/O connection.
Part   Frequency   Transmit Power Channels   Data Rate   RF Conn/ Antenna
HN-208E 2.4 GHz 100 mW 13 11 Mbps Integral 6dB Patch
HN-208EX 2.4 GHz 100 mW 13 11 Mbps Reverse TNC
HN-208I 2.4 GHz 100 mW 13 11 Mbps Integral 6dB Patch
HN-208IX 2.4 GHz 100 mW 13 11 Mbps Reverse TNC
HN-208S 2.4 GHz 100 mW 13 11 Mbps Integral 6dB Patch
HN-208SX 2.4 GHz 100 mW 13 11 Mbps Reverse TNC

back to top

IEEE 802.15.4 STANDARD. Based on the IEEE 802.15.4 wireless standard, the LPR2430 series modules are easy to integrate and provide robust wireless communications in applications where full mesh network operation is not required.
Modules Developer Kits - Order Today Serial Data Modems  

VERSITILITY. Comprised of the low-power 1mW RF power LPR2430 / LPR2430A and the extended range 100mW RF power LPR2430ER / LPR2430ERA, the Murata LPR2430 Series modules provide the flexibility and versatility to serve a variety of applications, from simple cable replacement to remote terminal data collection to sophisticated sensor networks. The LPR2430 includes CNL V2.0 Network Layer firmware which features a flexible and simple-to-use Application Programming Interface.

SLEEP CAPABILITY. LPR2430 series modules provide years of battery operation supported through two sleep modes. Timer sleep allows the module to be configured to wake as often as every 100 milliseconds or as infrequently as once every 3.5 years. Interrupt sleep lets the module sleep until it is awoken by either an edge triggered interrupt or an ADC value exceeding configurable limits. Regardless of what wakes the module, the designer can configure the module to remain awake for up to 2 seconds after sending its data to provide an opportunity for an application to communicate to the module before it returns to sleep.

I/O AND AUTO REPORT CAPABILITY. LPR2430 series modules feature Analog, Digital and Serial I/O including Analog & Digital I/O binding.

  • Standard UART interface for serial communications plus 6 GPIO, 3 ADCs, and 2 DACs (PWMs)
  • With the I/O Binding feature, one node has the ability to output on 2 GPIO lines the input value of 2 GPIO lines from another node
  • Auto-reporting features allow many sensor nodes to be built without a dedicated microcontroller - the micro-controller on the module does all the work
  • Auto-reporting mode provides module I/O updates based on timer or interrupts - without the need for the application to poll or otherwise request data
  • Interrupts are generated by edge-triggered events or by exceeding user-defined limits on ADC values - and any interrupt can be used to wake a sleeping mode and have the module send its I/O data
OVERCOMES OBSTRUCTIONS / MULTIPATH FADES. LPR2430 modules feature a one-hop relay that enables one node to send data to a base radio through another node. This unique feature alleviates problems caused when a network works well at commissioning but later periodically loses nodes for periods of time. Yet it doesn’t burden the entire network with the complexity and latency of full mesh – the relay is only used when the node cannot communicate directly with the base. Nodes periodically verify their communication paths to the base as well as to other nodes in the network. The application is not even aware this is happening – it is all handled by the modules.

SAME FORM FACTOR. At 1.05 sq. inch footprint, the LPR2430 series has the same form factor as Muratas Wi-Fi WSN802G modules, wireless mesh XDM2140 series modules, and ZigBee ZMN2430 series modules.

SAME PINOUT as Muratas Wi-Fi WSN802G modules, wireless mesh XDM2140 series modules, and ZigBee ZMN2430 series modules

FCC / IC / ETSI CERTIFIED. The LPR2430 series modules are certified for unlicensed operation in the USA, Canada and Europe.


back to top

802.15.4 Modules
Part   Frequency   Transmit Power Data Rate   RF Conn/ Antenna Development Kit
LPR2430 2.4 GHz 1 mW 250 kbps Module Pin LPR2430DK
LPR2430A 2.4 GHz 1 mW 250 kbps Chip Antenna LPR2430ADK
LPR2430ER 2.4 GHz 10 to 100 mW 250 kbps Module Pin LPR2430ERDK
LPR2430ERA 2.4 GHz 10 to 100 mW 250 kbps Chip Antenna LPR2430ERADK

802.15.4 Developer Kits


Fast-track Your Designs...
Order Your Developer Kit Today!

Murata RF Modules Developer Kits include the technology hardware and software to support the development and integration of Murata RF Modules into any machine-to-machine (M2M) application.

Part   Description  
LPR2430ADK Contains: 4 LPR2430A modules (2 installed on developer boards labeled Base and Remote), 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software C
LPR2430DK Contains: 4 LPR2430 modules (2 installed on developer boards labeled Base and Remote), 2 patch antennas, 2 dipole antennas with MMCX to SMA-R adapter cables, 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software CD
LPR2430ERADK Contains: 4 LPR2430ERA modules (2 installed on developer boards labeled Base and Remote), 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software C
LPR2430ERDK Contains: 4 LPR2430ER modules (2 installed on developer boards labeled Base and Remote), 2 patch antennas, 2 dipole antennas with MMCX to SMA-R adapter cables, 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software CD

back to top

802.15.4 Wireless Serial Data Modem
The ZN-241G is a low-cost, 802.15.4 wireless data modem that can provide an auto-configured, wireless replacement for RS-232 cable in office environments, and can also serve as a platform for multi-drop RS-485 networks in industrial settings. Housed in a ruggedized metal enclosure, the ZN-241G replaces hard wiring in commercial environments that make wired connections challenging or impractical or that require frequent reconfiguration.

For point-to-point communications, ZN-241Gs configure the link automatically; all that's required is plugging the devices into two serial interfaces and turning on power. Point-to-multipoint links are set up by via an included utility that simplifies the configuration of network IDs and channels, and a repeater function allows a remote node to relay data through another remote node when the direct path is blocked. The ZN-241G offers RS-232, USB, and RS-485 interface options, and operates license-free worldwide at 2.4 GHz with over-the-air data rates of up to 250 Kbps.

Part   Frequency   Transmit Power Data Rate   RF Conn/ Antenna Description  
ZN-241G 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA Standalone RS-232 Serial 802.15.4 Modem providing 100mW transmit power, with DB9 Connector, Antenna, Power Supply, and Serial Cable
ZN-241GI 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA Standalone Half-duplex RS-485/RS-232 Serial 802.15.4 Modem with Screw Terminal Connector, Antenna, and Power Supply
ZN-241GIOEM 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA 10 Pack of the ZN-241GM without Antenna or Power Supply
ZN-241GOEM 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA (10 Pack of the ZN-241G without antenna, power supply or serial cable)
ZN-241GSK 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA Starter kit including 2 ZN-241Gs, 2 2 dBi Antennas, 2 Power Supplies, 2 Serial Cables and Windows-based Configuration Utility
ZN-241GU 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA Standalone USB Serial 802.15.4 Modem, Antenna, Power Supply, and USB Cable (Can be powered from USB port)
ZN-241GUOEM 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA 10 Pack of the ZN-241GU without Antenna, Power Supply, or USB Cable

back to top

ULTRA RELIABLE. Based on Muratas proprietary frequency hopping spread spectrum (FHSS) technology, Muratas FHSS module are especially well-suited to commercial, industrial and factory environments. They ensure long-range data throughput even in the presence of electrical noise and multi-path fading.
DNT-Series Multi-Function
Configurable Modules
WIT-Series Wireless Telemetry Modules Developer Kits - Order Today
VERSATILITY. Murata offers two families of FHSS modules:
  • DNT series of highly-reliable multi-purpose FHSS modules for sensor networking for RF data rates of 38 kb/s to 500 kb/s, offered at a very low-price
  • WIT series of ultra-reliable FHSS modules for wireless telemetry applications for RF data rates of 172.8 kb/s to 1.23 Mb/s
FLEXIBILITY. The DNT series modules are highly configurable and enable the designer to modify the radio for use in many different applications.The DNT series modules provide multiple software configurable RF data rates and RF powers and support Analog and Digital I/O and Serial data. The WIT series includes a variety of radio options and supports UART.

SUPERIOR TRANSMISSION RANGES. 900 MHz DNT modules transmit 40+ miles, 2.4 GHz DNT modules and 900 MHz WIT modules transmit 20+ miles with omni-directional antennas; 2.4 GHz WIT modules transmit 5+miles with gain antennas.

STORE AND FORWARD REPEATING. Muratas FHSS modules feature store-and-forward repeating to extend range and enable transmission around barriers without expensive dedicated repeaters.

LOW POWER. The DNT series modules consume a low amount of power to allow them to operate for months on battery and the WIT series consume a sufficiently low amount of power to allow 8+ hours of battery operation.

FCC / IC / ETSI CERTIFIED. Muratas FHSS modules are certified for unlicensed operation in the USA, Canada and Europe as applicable by frequency band.

RoHS COMPLIANT. The DNT series and WIT2410, WIT2450, and WIT2492 series modules comply with Directive 2002/95/EC (RoHS)

back to top

DNT-Series FHSS Multi-Function Configurable Modules for
Wireless Sensor Networking
900 MHz and 2.4 GHz • 38 to 500 kb/s

Comprised of the 900 MHz DNT900 and the 2.4 GHz DNT2400, the DNT series is a low-cost, long-range, multi-purpose, multi-function frequency hopping line of RF modules. DNT modules support Analog and Digital I/O and Serial data, and have the ability to auto-report and sleep between reports thereby reducing power consumption. DNT modules support all standard serial data rates for host communications from 1.2 to 460.8 kb/s. On-board data buffering and an error-correcting air protocol provide smooth data flow and simplify the task of integration with existing applications.

900 MHz DNT900 — The 900 MHz ISM band allows license-free use in the US, Canada, South America, Australia and New Zealand.

2.4 GHz DNT2400 — 2.4 GHz ISM band allows the DNT2400 to be used license-free world-wide.

Highly Reliable and Secure FHSS Capabilities at Very Low Cost

  • Murata proprietary frequency hopping technology provides both robust communications reliability and interference rejection while minimizing multi-path fading
  • 40+ mile range (DNT900) and 5+ mile range (DNT2400) with omni-directional antennas (antenna height dependent)
  • AES-128 Encryption allows the most sensitive data to be securely sent wirelessly
  • Support for point-to-point, point-to-multipoint, and peer-to-peer applications
  • Low cost provides substantial cost savings over existing long-range radios without compromising features or radio performance
  • Non-volatile memory stores DNT module configuration when powered off
  • Dynamic TDMA slot assignment that maximizes throughput and CSMA modes that maximizes network size
  • Transparent ARQ protocol with data buffering ensures data integrity
  • Simple serial interface handles both data and control at up to 460.8 kb/s
Highly Configurable Including RF Data Rate and RF Transmit Power

The DNT Series modules provide a selection of over-the-air data rates and transmit power levels thus allowing one module to work for many products. When using the DNT Series, designers can be confident that the radio performance can be modified if needed when the design is finished without having to design-in another radio.

  • Configurable RF Data Rates from 38 kb/s and 500 kb/s • Multi-point, point-to-point, peer-to-peer and store & forward repeating
  • DNT900 configurable RF Transmit Power of 1 mW to 1W • Bandwidth Allocation
  • DNT2400 configurable RF Transmit Power of 1 mW to 100 mW • Configurable Frequency Hopping Rate
  • 40+ mile range DNT900, 5+ mile DNT2400 with omni-directional antennas • Analog and Digital I/O
  • Co-Located Network Support
  • Sleep Modes
Part   Frequency   Transmit Power Data Rate   RF Conn/ Antenna Development Kit  
DNT2400C 2.4 GHz 1 to 100mW 500 kbps U.FL DNT2400DK
DNT2400P 2.4 GHz 1 to 100mW 500 kbps U.FL DNT2400DK
DNT24C 2.4 GHz 10 to 100mW 250 kbps U.FL DNT24DK
DNT24CA 2.4 GHz 10 to 100mW 250 kbps Chip Antenna DNT24ADK
DNT24MC 2.4 GHz 10 or 63mW 250 kbps U.FL DNT24DK
DNT24MCA 2.4 GHz 10 or 63mW 250 kbps Chip Antenna DNT24ADK
DNT24MP 2.4 GHz 10 or 63mW 250 kbps U.FL DNT24DK
DNT24MPA 2.4 GHz 10 or 63mW 250 kbps Chip Antenna DNT24ADK
DNT24P 2.4 GHz 10 to 100mW 250 kbps U.FL DNT24DK
DNT24PA 2.4 GHz 10 to 100mW 250 kbps Chip Antenna DNT24ADK
DNT900C 900 MHz 1mW to 1W 500 kbps U.FL DNT900DK
DNT900P 900 MHz 1mW to 1W 500 kbps U.FL DNT900DK
DNT90C 900 MHz 150 mW 100 kbps U.FL DNT90DK
DNT90CA 900 MHz 150 mW 100 kbps Chip Antenna DNT90ADK
DNT90MC 900 MHz 40 or 158mW 100 kbps U.FL DNT90DK
DNT90MCA 900 MHz 40 or 158mW 100 kbps U.FL DNT90ADK
DNT90MP 900 MHz 40 or 158mW 100 kbps U.FL DNT90DK
DNT90MPA 900 MHz 40 or 158mW 100 kbps U.FL DNT90ADK
DNT90P 900 MHz 150 mW 100 kbps U.FL DNT90DK
DNT90PA 900 MHz 150 mW 100 kbps Chip Antenna DNT90ADK

back to top

WIT-Series FHSS Modules for Wireless Telemetry
900 MHz and 2.4 GHz • 172.8 – 1.23 Mb/s
Especially well-suited to commercial, industrial and factory settings, Muratas WIT modules ensure long-range data throughput even in the presence of electrical noise and multi-path fading. They can be configured in point-to-point and point-to-multipoint network topologies.

WIT modules operate in either a TDMA mode with dynamic, automatic bandwidth allocation which support up to 62 remotes or a CSMA mode that supports up to 1024 remotes. The TDMA mode is used where guaranteed bandwidth and latency are required. The CSMA mode is used where large numbers of remotes are needed. Latencies of the TDMA mode are as low as 5 ms.

WIT modules consume a sufficiently low amount of power to allow 8+ hours of battery operation. Error-less data reception is further assured by CRC error checking and ARQ (automatic repeat-request) schemes for auto-retransmission of bad packets.

License-free use — the 900 MHz ISM band of the WIT910 allows license-fee use in the US, Canada, South America, Australia and New Zealand; the 2.4 GHz ISM band allows the WIT2410, WIT2411,and WIT2450 modules to be used license-free world-wide

High-speed wireless data — From 172.8 kb/s for extended range applications such as SCADA up to 1.23 Mb/s throughput to serve virtually any data need

Superior transmission range — 900 MHz WIT910 transmits 1000 foot indoors and 20+ miles outdoors with omnidirectional antennas; 2.4 GHz WIT2410, WIT2411,and WIT2450 modules transmit 900 foot indoors and over 5 miles outdoors with gain antennas

Store-and-forward repeating — WIT910 and WIT2450 feature store-and-forward repeating o extend range and enable transmission around barriers without expensive dedicated repeaters

* WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

Part   Frequency   Transmit Power Data Rate   RF Conn/ Antenna Development Kit
WIT2410M4G 2.4 GHz 10 to 100 mW 460.8 kbps MMCX WIT2410DK
WIT2410S4G 2.4 GHz 10 to 100 mW 460.8 kbps MMCX WIT2410SDK
WIT2411D 2.4 GHz 10 to 100 mW 1.23 Mbps MMCX WIT2411DK
WIT2411F 2.4 GHz 10 to 100 mW 1.23 Mbps MMCX WIT2411DK
WIT2450FG 2.4 GHz 40 to 250 mW 460.8 kbps MMCX WIT2450DK
WIT2450M2 2.4 GHz 40 to 250 mW 460.8 kbps MMCX WIT2450DK
WIT2492M 2.4 GHz 10 mW to 100 mW 921.6 kbps MMCX
WIT910M 900 MHz 1 W 172.8 kbps MMCX WIT910DK
WIT910M2 900 MHz 1 W 172.8 kbps MMCX WIT910DK
WIT910S 900 MHz 1 W 172.8 kbps MMCX WIT910SDK

back to top

FHSS Developer Kits


Fast-track Your Designs...
Order Your Developer Kit Today!

Murata RF Modules Developer Kits include the technology hardware and software to support the development and integration of Murata RF Modules into any machine-to-machine (M2M) application.

Part   Description  
DNT2400DK (2) DNT2400P radios, (2) DNT2400 development boards, (2) 2 dBi dipole antennas, (2) 120/240 VAC 9 V wall-plug power suppliers, (2) 9 V batteries, (2) RJ-45/DB-9F cable assemblies, (1) RJ-11/DB-9F cable assembly, (2) A/B USB cables, DNT2400DK documentation and software CD
DNT24ADK (2) DNT24PA radios installed in DNT24 interface boards, labeled Base and Remote
(2) wall-plug power suppliers, 9 VDC, 120/240 VAC, plus 2 batteries, 9 VDC
(2) RJ-45/DB-9F cable assemblies and two A/B USB cables
Documentation and software CD
DNT24DK (2) DNT24P radios installed in DNT24 interface boards, labeled Base and Remote
(2) patch antennas and two 2 dBi dipole antennas with MMCX/RSMA adaptor cables
(2) wall-plug power suppliers, 9 VDC, 120/240 VAC, plus 2 batteries, 9 VDC
(2) RJ-45/DB-9F cable assemblies and two A/B USB cables
Documentation and software CD
DNT900DK (2) DNT900P radios, (2) DNT900 development boards, (2) 2 dBi dipole antennas, (2) 120/240 VAC 9 V wall-plug power suppliers, (2) 9 V batteries, (2) RJ-45/DB-9F cable assemblies, (1) RJ-11/DB-9F cable assembly, (2) A/B USB cables, DNT900DK documentation and software CD
DNT90ADK (2) DNT90PA modules with pins, (2) DNT90 development boards, (2) USB cables, (2) Serial cables, Antennas and RF cables, Program CD with software and manuals, Quick start guide
DNT90DK (2) DNT90 modules with pins, (2) DNT90 development boards, (2) USB cables, (2) Serial cables, Antennas and RF cables, Program CD with software and manuals, Quick start guide
WIT2410DK (2) HN-510 serial modems with flow control indicators, RS-232 interface, battery pack, power supply, dipole antenna, (2) WIT2410M modules, RF cables, antennas and programming software
WIT2410SDK SNAP2410 Developer Kit containing 2 HN-510 serial modems with flow control indicators, RS-232 interface, battery, dipole antenna, 1 SNAP2410 10/100BaseT access point, 2 WIT2410 modules, RF cable, antennas and programming software
WIT2411DK (2) HN-211 serial modems with flow control indicators, RS-232 and USB interfaces, battery, dipole antenna, (2) WIT2411 modules, and programming software
WIT2411SDK SNAP2411 Developer Kit containing 2 HN-211 serial modems with flow control indicators, RS-232 and USB interfaces, battery, dipole antenna, 1 SNAP2411 10/100BaseT access point, 2 WIT2411 modules, RF cables and dipole antennas and programming software
WIT2450DK (2) HN-550 serial modems with flow control indicators, RS-232 interface, battery pack, power supply, dipole antenna, (2) WIT2450 modules, RF cables, antennas and programming software
WIT910DK (2) HN-591 serial modems with flow control indicators, RS-232 interface, battery pack, power supply, dipole antenna, (2) WIT910M modules, RF cables, antennas and programming software
WIT910SDK SNAP910 Developer Kit containing 2 HN-591 serial modems with flow control indicators, RS-232 interface, battery, dipole antenna, 1 SNAP910 10/100BaseT access point, 2 WIT910 modules, RF cables, antennas and programming software

back to top

ULTRA RELIABLE. Based on Muratas proprietary frequency hopping spread spectrum (FHSS) technology, Muratas FHSS module are especially well-suited to commercial, industrial and factory environments. They ensure long-range data throughput even in the presence of electrical noise and multi-path fading.
HN Serial Modems SEM Ethernet Bridges SNAP Access Points
HN-91 Series Long Range Standalone Wireless Modems
900 MHz • 172.8 kp/s
Built on the Murata WIT910 RF modules, the versatile Murata HN-91 series wireless modems employ Murata proprietary FHSS technology and are well-suited for any industrial or commercial application needing complete, reliable, long-range, serial modems. The HN-91 series modems can be used standalone as base stations or they can be used as remote stations when paired with Murata WIT910 RF modules.

HN wireless modems are ideal for fixed wireless network applications in a range of indoor, outdoor, and harsh environments. They support data 172.8 kb/s data rate, are Class I Div 2 certified, and support Modbus, DNP3, and DF1 protocols. HN wireless modems come in a variety of enclosures including NEMA 4X and IP 66 rated enclosures with an effective operating temperature range of -30 °C to +70 °C.

The HN-591 desktop wireless modems are right at home in the relative comfort of a plant foreman's office, while the HN-291modems deliver indoor / outdoor SCADA flexibility.

Combining HN-series Wireless Modems with SNAP Serial-to-Ethernet Access Point. Add SNAP Wireless Serial-to-Ethernet Access Points as a base station for both WIT OEM modules and HN modems, which allow non-Ethernet serial devices to operate as nodes on an Ethernet network.

*Boxed products based on WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

Part   Frequency   Transmit Power   Channels   Data Rate   RF Conn/ Antenna  
HN-291 900 MHz 1 W 54 172.8 kbps Internal 3 dBi Patch
HN-291X 900 MHz 1 W 54 172.8 kbps Reverse TNC
HN-294 900 MHz 1 W 54 172.8 kbps Internal 3 dBi Patch
HN-294X 900 MHz 1 W 54 172.8 kbps Reverse TNC
HN-591 900 MHz 1 W 54 172.6 kbps

back to top

HN-50 Series Low Cost Standalone Wireless Modems
2.4 GHz • 460.8 kb/s

Built on the Murata WIT2450 RF modules, the versatile Murata HN-50 series wireless modems employ Murata proprietary FHSS technology and are well-suited for any industrial or commercial application needing complete, reliable, long-range, serial modems. The HN-50 series modems can be used standalone as base stations or they can be used as remote stations when paired with Murata WIT2450 RF modules.

HN wireless modems are ideal for fixed wireless network applications in a range of indoor, outdoor, and harsh environments. They support data 460.8 kb/s data rate, are Class I Div 2 certified, and support Modbus, DNP3, and DF1 protocols. HN wireless modems come in a variety of enclosures including NEMA 4X and IP 66 rated enclosures with an effective operating temperature range of -30 °C to +70 °C.

Combining HN-series Wireless Modems with SNAP Serial-to-Ethernet Access Point. Add SNAP Wireless Serial-to-Ethernet Access Points as a base station for both WIT OEM modules and HN modems, which allow non-Ethernet serial devices to operate as nodes on an Ethernet network.

Murata Part   Frequency   Transmit Power Channels   Data Rate   RF Conn/ Antenna
HN-250 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch
HN-250-100 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch
HN-250U 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch
HN-250U-100 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch
HN-250UX 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse TNC
HN-250X 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse TNC
HN-254 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch
HN-254U 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch
HN-254UX 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse TNC
HN-254X 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse TNC
HN-550 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse SMA

back to top

HN-10 and HN-11 Series Standalone Wireless Modems
2.4 GHz • 460.8 kb/s

The HN-10 series modems are built on Murata WIT2410 RF modules whereas the HN-11 series modems are built upon the WIT2411 RF modules. Both the HN-10 and HN-11 series modems employ Murata proprietary FHSS technology and are well-suited for any industrial or commercial application needing complete, reliable, long-range, serial modems.

The HN-10 series modems can be used standalone as base stations or they can be used as remote stations when paired with Murata WIT2410 RF modules. The HN-11 series modems can be used standalone as base stations or they can be used as remote stations when paired with Murata WIT2411 RF modules.

HN wireless modems are ideal for fixed wireless network applications in a range of indoor, outdoor, and harsh environments. They support data 460.8 kb/s data rate, are Class I Div 2 certified, and support Modbus, DNP3, and DF1 protocols. HN wireless modems come in a variety of enclosures including NEMA 4X and IP 66 rated enclosures with an effective operating temperature range of -30 °C to +70 °C.

Combining HN-series Wireless Modems with SNAP Serial-to-Ethernet Access Point. Add SNAP Wireless Serial-to-Ethernet Access Points as a base station for both WIT OEM modules and HN modems, which allow non-Ethernet serial devices to operate as nodes on an Ethernet network.

*Boxed products based on WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

Murata Part   Frequency   Transmit Power   Channels   Data Rate   RF Conn/ Antenna
HN-1010 2.4 GHz 100 mW 75 460.8 kbps TNC
HN-1510 2.4 GHz 100 mW 75 460.8 kbps TNC
HN-2010 2.4 GHz 100 mW 75 460.8 kbps 2 TNC
HN-210 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch
HN-210D 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch
HN-210DX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
HN-210X 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
HN-211R 2.4 GHz 100 mW 64 1.23 Mbps Internal 6 dBi Patch
HN-211RX 2.4 GHz 100 mW 64 1.23 Mbps Reverse TNC
HN-211U 2.4 GHz 100 mW 64 1.23 Mbps Internal 6 dBi Patch
HN-211UX 2.4 GHz 100 mW 64 1.23 Mbps Reverse TNC
HN-214 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch
HN-214D 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch
HN-214DX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
HN-214U 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch
HN-214UX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
HN-214X 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
HN-3010 2.4 GHz 100 mW 75 460.8 kbps TNC
HN-510 2.4 GHz 100 mW 75 460.8 kbps Reverse SMA
HN-511 2.4 GHz Reverse SMA

back to top

SEM Series Spread Spectrum Wireless Ethernet Bridges
900 MHz and 2.4 GHz • 172.8 – 1.23 Mb/s
Murata SEM series wireless Ethernet bridges provide high-speed wireless connectivity between distant Ethernet nodes where cable runs are impractical. All SEMs feature the company’s patented FHSS technology for robust RF performance. Typical SEM uses include Ethernet bridging, SCADA networking, PLC networking, and other industrial automation or data collection applications.

SEMs can function as a high speed bridge between two 10/100 Base-T Ethernet networks; they can also provide wireless connectivity between an Ethernet network and multiple remote Ethernet network segments. Highly complex networks and extended coverage can be achieved by combining point-to-point or point-to-multipoint configurations with Murata repeaters.

The Murata SEM Ethernet Bridges are Class I, Div. 2 certified in both the 900 MHz and 2.4 GHz bands. SEM bridges include a standard 10/100 Base-T Ethernet port, antenna, and power connectors. Five LEDs indicate power status and data activity. Class I Div 1 versions are available by special order.

The SEM “D” model Ethernet radio is a DIN rail mount version, and the SEM “X” models use a remote, weatherproof, wireless Ethernet radio housed in a NEMA 4X / I.P. 66 enclosure.

900 MHz SEM Ethernet Bridges — Murata SEM wireless 900 MHz Ethernet bridge is a high speed/long range wireless networking product that provides 172.8 kb/s over-the-air data rate and over 20 miles demonstrated communications range with 3 dB omni-directional antenna. Uses for a SEM wireless 900 MHz Ethernet bridge include SCADA networks, PLC networking, and other industrial automation or data collection applications.

2.4 GHz SEM Ethernet Bridges — The SEM2410 and SEM2411 link Ethernet nodes in an industrial communication hierarchy up to 5 miles apart (with gain antennas). The over-the-air data rate for the SEM2410 is 460 Kb/s and 1.23 Mb/s for the SEM2411. Murata patented FHSS assures reliable performance even in high-multi-path and noisy RF environments.

Ethernet Radio Security — Murata SEM wireless Ethernet bridges provide multiple levels of security. First, their communications use Murata proprietary frequency hopping spread spectrum (FHSS) protocol, which is understood only by other SEM Ethernet radio devices configured to use the same hopping pattern (out of 64 possibilities). To ensure that the SEM master communicates only with its intended SEM slaves, the SEM master can be configured to define the precise number of slaves (up to 62) that can register on the network, and can also be configured to authenticate an ID and password from each SEM slave prior to granting registration. Finally, SEM Ethernet radios include password protection for both console port and Telnet sessions, and can be configured to allow the opening of Telnet sessions only from specified IP addresses.

*Boxed products based on WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

Murata Part   Frequency   Transmit Power   Channels   Data Rate   RF Conn/ Antenna  
SEM2410 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
SEM2410D 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
SEM2410DX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
SEM2410X 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
SEM2411 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC
SEM2411D 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC
SEM2411DX 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC
SEM2411LC 2.4 GHz 100 mW 43 1.23 Mbps Internal 12 dBi Patch
SEM2411X 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC
SEM910 900 MHz 1 W 54 172.8 kbps Reverse TNC
SEM910D 900 MHz 1 W 54 172.8 kbps Reverse TNC
SEM910DX 900 MHz 1 W 54 172.8 kbps Reverse TNC
SEM910X 900 MHz 1 W 54 172.8 kbps Reverse TNC

back to top

SNAP Series Wireless Access Points for Ethernet Network
900 MHz and 2.4 GHz • 172.8 – 1.23 Mb/s
As the base station for WIT series 900 MHz and 2.4 GHz OEM modules (WIT910, WIT2410, and WIT2411) and HN series modems, SNAP access points provide seamless Serial-to-Ethernet connectivity with remote wireless nodes transmitting unformatted data to a server-based application running on the SNAP Ethernet network. SNAP devices remove the need for the remote devices to handle the TCP/IP protocol. Certified by the FCC and CE marked on 2.4 GHz products, the SNAP family offers license-free use.

Murata FHSS technology — Patented FHSS technology provides reliable communications in high noise floor environments, superior jamming and interference immunity. CRC checking and automatic repeat request (ARQ) deliver error-free data.

Serial to Ethernet connectivity — Allows transparent communication with remote devices and network-based applications. Allows limited intelligence and legacy serial devices to appear as nodes on an Ethernet network.

Customizable operation — All parameters are configurable under software control. Even transmit power can be selected through a straightforward command set.

Suited to tough environments — All SNAPs are available in "D" DIN rail mount versions and "X" remote radio versions for harsh and outdoor use.

*Boxed products based on WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

Murata Part   Frequency   Transmit Power   Channels   Data Rate   RF Conn/ Antenna  
SNAP2410 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
SNAP2410D 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
SNAP2410DX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
SNAP2410X 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC
SNAP2411 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC
SNAP2411D 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC
SNAP2411DX 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC
SNAP2411X 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC
SNAP910 900 MHz 1 W 54 172.8 kbps Reverse TNC
SNAP910D 900 MHz 1 W 54 172.8 kbps Reverse TNC
SNAP910DX 900 MHz 1 W 54 172.8 kbps Reverse TNC
SNAP910X 900 MHz 1 W 54 172.8 kbps Reverse TNC

back to top

WirelessHART. Based on DUST Networks’ IA-510(H) WirelessHART™ technology, the Murata XDM2510H module is designed to provide ultra-reliable communications and ultra-low-power for ultra-long battery life in a wide range of sensor network applications. The XDM2510H is tailored for use in battery and line powered wireless devices for applications that require proven performance and scalability in a WIrelessHART™ network. The XDM2510H modules allow OEMs to add WirelessHART capability to their process automation field devices.
WirelessHART 2.4GHz Developer Kits - Order Today

WirelessHART 2.4GHz
XDM2510H Data Sheet Ultra Low Power Consumption
  • Innovative radio design consumes 80% less power in receive mode than competing solutions
  • Ultra-efficient power usage delivers over a decade of network operation on two AA batteries
  • Automatic network-wide coordination for efficient power usage
Ultra Reliable Networking
  • WirelessHART delivers greater than 99.9% typical network reliability
  • Frequency hopping provides interference rejection and minimizes multipath fading
  • Mesh networking provides built-in redundancy
  • Every XDM2510H module acts as both an endpoint and a router, increasing network reliability
  • Automatic self-organizing mesh networking capability built in
Ultra Easy Integration
  • Provides all the module functionality with no embedded programming or complex configuration required
  • Interfaces is well designed and multi-functional
  • High-level Data Link Control (HDLC) serial interface includes bi-directional flow control
  • Industrial temperature range -40 to +85 °C
  • XDM2510H-P version for plug in installation, XDM2510H-C version for solder reflow

OPTIMUM NETWORK PERFORMANCE. The XDM2510H companion gateway and network manager – the XG2510H – combines standard Ethernet gateway functions with sophisticated networking, data, and security management capabilities for a network of XDM2510H modules. The network manager portion runs advanced algorithms to continuously optimize network performance and communications reliability to accommodate changing RF and environmental conditions. It also continuously monitors network performance and makes on-the-fly adjustments to ensure ultra-high data communications reliability. Adjustments include black-listing poor performing channels on a node-by-node basis and then white-listing them when conditions improve.

SAME FORM FACTOR. At 1.05 sq. inch footprint, the XDM2510H series has the same form factor as Murata’s IEEE 802.15.4 LPR2430 series modules, Wi-Fi WSN802G modules and wireless mesh ZigBee ZMN2430 series modules.

SAME PINOUT as Murata’s IEEE 802.15.4 LPR2430 series modules, Wi-Fi WSN802G modules and wireless mesh ZigBee ZMN2430 series modules.

FCC / IC / ETSI CERTIFIED. The ZMN2430 series modules are certified for unlicensed operation in the USA, Canada and Europe.

RoHS COMPLIANT. The XDM2510H complies with Directive 2002/95/EC (RoHS)

Murata Part Frequency Data Rate Output Power RF Conn/ Antenna Development Kit
XDM2510HC 2.4 GHz 250 kbps 8 dBm U.FL XDM2510HDK
XDM2510HP 2.4 GHz 250 kbps 8 dBm U.FL XDM2510HDK

back to top

Development Kits


Fast-track Your Designs...
Order Your Developer Kit Today!

Murata RF Modules Developer Kits include the technology hardware and software to support the development and integration of Murata RF Modules into any machine-to-machine (M2M) application.

Murata Part   Frequency   Description  
XDM2510HDK 2.4 GHz Contains 4 XDM2510H modules, 4 XDM2510H development boards, 1 XG2510HE gateway, 1 Ethernet and 5 Serial cables, 9 V batteries and wall-mount power supplies, Antennas and RF cables, Program CD with software and manuals, Quick Start Guide

 
Murata Manufacturing Co., Ltd. Global
Contact Us     Site Map     Privacy Statement and Copyright     Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved.