RFM offers a full set of custom embedded wireless networking solutions like Zigbee wireless mesh sensor networks, RF modules, IC transceiver, IC transmitters and IC receivers. RFM, Inc. manufactures low power wireless and RF radio modules, wireless mesh nodes for distributed sensing on distributed sensor networks. Low Power radio, n../arrowband and short range devices, front end saw filters, active RFID, RFIC, coupled resonator filters, single silicon chips in the 70MHZ and 300-1000Mhz range.
 
Technical Support       Log In

Bookmark and Share


Download 2011
Wireless Device
Selection Guide

Developer Kits

Fast-track Your Designs...Order Your Developer Kit Today!
ACCELERATES INTEGRATION
  • Complete out-of-the-box solution with the all components need to put a system "on the air”
  • Utility Program includes multi-tab dialog boxes for rapid and straight-forward parameter configuration
  • Register your developer kit to receive free technical support
SIMPLE TO SET-UP AND CONFIGURE
  • Includes "Quick Start Guide” to rapidly put a system on the air in less than an hour
  • Utility Program is Windows-based and very intuitive to use
  • Development boards included in each kit feature power supplies, interfaces and direct connections to quickly connect to PC

  • Wi-Fi +
    BlueTooth
  • SAW
    Short-Range
  • RFIC
    Short-Range
  • 802.11g
     
  • 802.15.4
     
  • Proprietary
    FHSS
  • Wireless
    Mesh
  • ZigBee
     

Wi-Fi + Bluetooth Combination Short-Range Radio Modules

Quickly Add Standards-Based Connectivity Into Products
Best-in-class WLAN and Bluetooth co-existence technology on a single-chip
Minimal external circuitry required to complete a radio design
Drivers are available for Linux and Android

Wi-Fi + Bluetooth Evaluation Kits


Fast-track Your Designs...
Order Your Developer Kit Today!

Evaluation Kit Contains
(1) Evaluation Board
CD with GUI
USB to Serial Converter
(2) 2.4 / 5.8 GHz Antennas

RFM Part   Frequency   Data Rate   Description  
DR-WLS1270-EV 2.412-2.485 GHz 6.5 Mbps Evaluation Kit for the WLS1270
DR-WLS1271L-EV 2.412-2.485 GHz 6.5 Mbps Evaluation Kit for the WLS1271L
DR-WLS1273L-EV 2.412 to 2.485 GHz & 4.920 to 5.824 GHz 6.5 Mbps Evaluation Kit for the WLS1273L

SAW-Based Short-Range Radios Developer Kits and Evaluation Boards
Developer Kits Evaluation Kits Development Modules      

Developer Kits - "Out-of-the-Box" Operation


Fast-track Your Designs...
Order Your Developer Kit Today!

Each Kit Contains:

  • (2) DR Development Boards
  • (2) USB 2.0 cables
  • (2) 9 V batteries
  • (2) tuned, SMA antennas
  • Program CD with documentation
  • Configuration software
    • RFM Part   Frequecy   Data Rate   Output Power  
    DR1200-DK 916.50 MHz 22.5 kbps 1 mW
    DR1200A-DK 916.50 MHz 2 kbps 1 mW
    DR1201-DK 868.35 MHz 22.5 kbps 1 mW
    DR1201A-DK 868.35 MHz 2 kbps 1 mW
    DR1300-DK 433.92 MHz 22.5 kbps 1 mW
    DR1300A-DK 433.92 MHz 2 kbps 1 mW
    DR2000-DK 916.50 MHz 115.2 kbps 1 mW
    DR7001-DK 315 MHz 115.2 kbps 10 mW
    DR7002-DK 418 MHz 115.2 kbps 10 mW
    DR7003-DK 303.825 MHz 115.2 kbps 10 mW
    DR8000-DK 916.50 MHz 115.2 kbps 10 mW
    DR8001-DK 868.35 MHz 115.2 kbps 10 mW
    DR8100-DK 916.50 MHz 115.2 kbps 10 mW

    back to top

    SAW Radio Transceiver Evaluation Kits (Third Generation ASH Technology Only)


    Fast-track Your Designs...

    Each Evaluation Kit Contains:

  • (1) DR Module
  • (1) Interface Board w/Microprocessor
  • (2) USB 2.0 cables
  • (2) 9 V batteries
  • (2) tuned, SMA antennas
  • Program CD with documentation
    • RFM Part   Frequecy   Data Rate   Output Power  
    DR7000-EV 433.92 MHz 115.2 kbps 10 mW
    DR7001-EV 315 MHz 115.2 kbps 10 mW
    DR7003-EV 303.825 MHz 115.2 kbps 10 mW
    DR8000-EV 916.50 MHz 115.2 kbps 10 mW
    DR8001-EV 868.35 MHz 115.2 kbps 10 mW
    DR8100-EV 916.50 MHz 115.2 kbps 10 mW

    back to top

    SAW Radio Development Modules (Second and Third Generation ASH Technology)


    Fast-track Your Designs...

    Pre-mounted, pre-soldered, and ready for
    proof-of-concept, testing and evaluation.

    Hook up to a microprocessor and
    you are ready to go.

    RFM Part   Frequecy   Data Rate   Output Power  
    DR3000 916.50 MHz 2.4 kbps 1 mW
    DR3000-1 916.50 MHz 115.2 kbps 1 mW
    DR3001 868.35 MHz 2.4 kbps 1 mW
    DR3100 433.92 MHz 2.4 kbps 1 mW
    DR3100-1 433.92 MHz 115.2 kbps 1 mW
    DR3101 315 MHz 2.4 kbps 1 mW
    DR3300 916.50 MHz 1000 kbps 1 mW
    DR4000 916.50 MHz 115.2 kbps 1 mW
    DR4001 868.35 MHz 115.2 kbps 1 mW
    DR4100 433.92 MHz 115.2 kbps 1 mW
    DR4101 315 MHz 115.2 kbps 1 mW
    DR4103 303.825 MHz 115.2 kbps 1 mW
    DR5000 916.50 MHz 19.2 kbps 1 mW
    DR5001 868.35 MHz 19.2 kbps 1 mW
    DR5100 433.92 MHz 19.2 kbps 1 mW
    DR5101 315 MHz 19.2 kbps 1 mW
    DR5103 303.825 MHz 19.2 kbps 1 mW
    DR7000 433.92 MHz 115.2 kbps 10 mW
    DR7001 315 MHz 115.2 kbps 10 mW
    DR7003 303.825 MHz 115.2 kbps 10 mW
    DR8000 916.50 MHz 115.2 kbps 10 mW
    DR8001 868.35 MHz 115.2 kbps 10 mW
    DR8100 916.50 MHz 115.2 kbps 10 mW

    RFIC Short-Range Radios Developer Kits and Evaluation Boards
    Developer Kits - Order Today Evaluation Kits  

    Developer Kits - "Out-of-the-Box" Operation


    Each Kit Contains:

    • (2) DR Radio Boards
    • (2) DR Interface Boards
    • (2) Dipole Antennas
    • (2) USB 2.0 A/B cables
    • (2) Universal Wall-plug
      Power Supplies


    • (2) AA Battery Packs
    • (4) AA Batteries
    • CD Containing: RFIC Design
      Assistant Software, KIT
      Firmware C Source Code,
      User’s Guides
    RFM Part   Frequency   Data Rate   Output Power  
    DR-TRC103-868-DK 868 MHz 200 kbps 13 dBm
    DR-TRC103-915-DK 915 MHz 200 kbps 13 dBm
    DR-TRC103-950-DK 950 MHz 200 kbps 13 dBm
    DR-TRC104-2400-DK 2.4 GHz 1 Mbps 0 dBm
    DR-TRC105-304-DK 304 MHz 200 kbps 13 dBm
    DR-TRC105-315-DK 315 MHz 200 kbps 13 dBm
    DR-TRC105-345-DK 345 MHz 200 kbps 13 dBm
    DR-TRC105-372-DK 372 MHz 200 kbps 13 dBm
    DR-TRC105-390-DK 390 MHz 200 kbps 13 dBm
    DR-TRC105-403-DK 403 MHz 200 kbps 13 dBm
    DR-TRC105-434-DK 434 MHz 200 kbps 13 dBm
    DR-TRC105-450-DK 450 MHz 200 kbps 13 dBm

    back to top

    Evaluation Kits


    Fast-track Your Designs...

    Each Evaluation Kit Contains:

  • (2) DR Evaluation Boards
  • (2) Dipole Antennas
  • (2) AA Battery Packs
  • (4) AA Batteries
  • User Guide
    • RFM Part   Frequency   Data Rate   Output Power  
    DR-TRC103-868-EV 868 MHz 200 kbps 13 dBm
    DR-TRC103-915-EV 915 MHz 200 kbps 13 dBm
    DR-TRC103-950-EV 950 MHz 200 kbps 13 dBm
    DR-TRC104-2400-EV 2.4 GHz 1 Mbps 0 dBm
    DR-TRC105-304-EV 304 MHz 200 kbps 13 dBm
    DR-TRC105-315-EV 315 MHz 200 kbps 13 dBm
    DR-TRC105-345-EV 345 MHz 200 kbps 13 dBm
    DR-TRC105-372-EV 372 MHz 200 kbps 13 dBm
    DR-TRC105-390-EV 390 MHz 200 kbps 13 dBm
    DR-TRC105-403-EV 403 MHz 200 kbps 13 dBm
    DR-TRC105-434-EV 434 MHz 200 kbps 13 dBm
    DR-TRC105-450-EV 450 MHz 200 kbps 13 dBm
    DR-TXC100-315 315 MHz 100 kbps 10 dBm
    DR-TXC100-433 433.92 MHz 100 kbps 10 dBm

    Wi-Fi SENSOR NETWORKING. The WSN802G is a 2.4 GHz IEEE 802.11g radio transceiver module that enables OEMs to build low-power wireless local area networking (WLAN) and sensor monitoring solutions for the global market.

    802.11g Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Description   List Price  
    WSN802GADK The WSN802GADK Contains: 1 WSN802GPA module, 1 WSN802GPA development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide $139.00
    WSN802GADK-A The WSN802GADK-A Contains: 1 WSN802GPA module, 1 WSN802GPA development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide AND wireless router $199.00
    WSN802GDK The WSN802GDK Contains: 1 WSN802GP module, 1 WSN802GP development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide $139.00
    WSN802GDK-A The WSN802GDK-A Contains: 1 WSN802GP module, 1 WSN802GP development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide AND wireless router $199.00

    IEEE 802.15.4 STANDARD. Based on the IEEE 802.15.4 wireless standard, the LPR2430 series modules are easy to integrate and provide robust wireless communications in applications where full mesh network operation is not required.

    802.15.4 Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Description   List Price  
    LPR2430ADK Contains: 4 LPR2430A modules (2 installed on developer boards labeled Base and Remote), 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software C $299.00
    LPR2430DK Contains: 4 LPR2430 modules (2 installed on developer boards labeled Base and Remote), 2 patch antennas, 2 dipole antennas with MMCX to SMA-R adapter cables, 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software CD $299.00
    LPR2430ERADK Contains: 4 LPR2430ERA modules (2 installed on developer boards labeled Base and Remote), 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software C $299.00
    LPR2430ERDK Contains: 4 LPR2430ER modules (2 installed on developer boards labeled Base and Remote), 2 patch antennas, 2 dipole antennas with MMCX to SMA-R adapter cables, 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software CD $299.00

    ULTRA RELIABLE. Based on RFMs proprietary frequency hopping spread spectrum (FHSS) technology, RFMs FHSS module are especially well-suited to commercial, industrial and factory environments. They ensure long-range data throughput even in the presence of electrical noise and multi-path fading.

    FHSS Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Description   List Price  
    DNT2400DK (2) DNT2400P radios, (2) DNT2400 development boards, (2) 2 dBi dipole antennas, (2) 120/240 VAC 9 V wall-plug power suppliers, (2) 9 V batteries, (2) RJ-45/DB-9F cable assemblies, (1) RJ-11/DB-9F cable assembly, (2) A/B USB cables, DNT2400DK documentation and software CD $359.00
    DNT24ADK (2) DNT24PA radios installed in DNT24 interface boards, labeled Base and Remote
    (2) wall-plug power suppliers, 9 VDC, 120/240 VAC, plus 2 batteries, 9 VDC
    (2) RJ-45/DB-9F cable assemblies and two A/B USB cables
    Documentation and software CD    		 $199.00
    DNT24DK (2) DNT24P radios installed in DNT24 interface boards, labeled Base and Remote
    (2) patch antennas and two 2 dBi dipole antennas with MMCX/RSMA adaptor cables
    (2) wall-plug power suppliers, 9 VDC, 120/240 VAC, plus 2 batteries, 9 VDC
    (2) RJ-45/DB-9F cable assemblies and two A/B USB cables
    Documentation and software CD    		 $199.00
    DNT900DK (2) DNT900P radios, (2) DNT900 development boards, (2) 2 dBi dipole antennas, (2) 120/240 VAC 9 V wall-plug power suppliers, (2) 9 V batteries, (2) RJ-45/DB-9F cable assemblies, (1) RJ-11/DB-9F cable assembly, (2) A/B USB cables, DNT900DK documentation and software CD $359.00
    DNT90DK (2) DNT90 modules with pins, (2) DNT90 development boards, (2) USB cables, (2) Serial cables, Antennas and RF cables, Program CD with software and manuals, Quick start guide $199.00
    WIT2410DK (2) HN-510 serial modems with flow control indicators, RS-232 interface, battery pack, power supply, dipole antenna, (2) WIT2410M modules, RF cables, antennas and programming software $795.00
    WIT2410SDK SNAP2410 Developer Kit containing 2 HN-510 serial modems with flow control indicators, RS-232 interface, battery, dipole antenna, 1 SNAP2410 10/100BaseT access point, 2 WIT2410 modules, RF cable, antennas and programming software $1,795.00
    WIT2411DK (2) HN-211 serial modems with flow control indicators, RS-232 and USB interfaces, battery, dipole antenna, (2) WIT2411 modules, and programming software $995.00
    WIT2411SDK SNAP2411 Developer Kit containing 2 HN-211 serial modems with flow control indicators, RS-232 and USB interfaces, battery, dipole antenna, 1 SNAP2411 10/100BaseT access point, 2 WIT2411 modules, RF cables and dipole antennas and programming software $1,995.00
    WIT2450DK (2) HN-550 serial modems with flow control indicators, RS-232 interface, battery pack, power supply, dipole antenna, (2) WIT2450 modules, RF cables, antennas and programming software $495.00
    WIT910DK (2) HN-591 serial modems with flow control indicators, RS-232 interface, battery pack, power supply, dipole antenna, (2) WIT910M modules, RF cables, antennas and programming software $795.00
    WIT910SDK SNAP910 Developer Kit containing 2 HN-591 serial modems with flow control indicators, RS-232 interface, battery, dipole antenna, 1 SNAP910 10/100BaseT access point, 2 WIT910 modules, RF cables, antennas and programming software $1,795.00

    WIRELESS MESH NETWORKING. RFM offers a broad range of wireless sensor networking products for commercial, light industrial, agricultural and urban infrastructure, and heavy industrial mesh applications.

    Wireless Mesh Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Description   List Price  
    XDM2510HDK Contains 4 XDM2510H modules, 4 XDM2510H development boards, 1 XG2510HE gateway, 1 Ethernet and 5 Serial cables, 9 V batteries and wall-mount power supplies, Antennas and RF cables, Program CD with software and manuals, Quick Start Guide $2,995.00

    ZigBee Pro Stack: ZigBee Pro features ZigBee Smart Energy and Home Automation Profiles.

    The ZPM3570 is built around Ember's EM357 ZigBee RFIC coupled with a power amplifier and low noise amplifier to increase the RF transmit power and receive sensitivity. The 100mW coupled with the -103dBm receive sensitivity provides exceptional range. The on-module antenna keeps device costs low by eliminating the cost of a separate antenna.

    ZigBee Pro Development Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Frequency   Description   List Price  
    ZPM3570DK 2.4 GHz The ZPM3570DK Development Kit Contains
    • (2) ZPM3570 development boards
    • (2) USB and 2 Serial Cables
    • 9V Batteries and Wall-mount Power Supplies
    • Antennas and RF Cables
    • Program CD with software and manuals
    • Quick Start Guide    		 $199.00

    ZIGBEE STANDARD. Based on the IEEE 802.15.4 standard and the ZigBee protocol stack, the ZMN2430 series modules are easy to integrate and provide robust wireless communications for mesh networking. They are suitable for a variety of applications including sensor monitoring, building and home automation, and any other applications requiring low-power consumption.

    ZigBee Standard Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Frequency   Description   List Price  
    ZMN2405DK 2.4 GHz Contains: 2 ZMN2405 ZigBee evaluation boards (high-power serial interface boards built around the 1 mW ZigBee ZMN2405 module), 2 AC power adapters and cords, 2 patch antennas, 2 USB cables, 2 Serial cables, 2 RF cables, 2 omni antennas, 2 9 V batteries, 1 Software CD $299.00
    ZMN2405HPDK 2.4 GHz Contains: 2 ZMN2405HP evaluation boards (high-power serial interface boards built around the 100 mW ZigBee ZMN2405HP module), 2 AC power adapters and cords, 2 patch antennas, 2 USB cables, 2 Serial cables, 2 RF cables, 2 omni antennas, 2 9 V batteries, 1 Software CD $299.00
    ZMN2430ADK 2.4 GHz Contains: 2 ZMN2430A evaluation boards (high-power serial interface boards built around the 1 mW ZigBee ZMN2430A module), 2 AC power adapters and cords, 2 patch antennas, 2 USB cables, 2 Serial cables, 2 RF cables, 2 omni antennas, 2 9 V batteries, 1 Software CD $299.00
    ZMN2430HPADK 2.4 GHz Contains: 2 ZMN2430HPA evaluation boards (high-power serial interface boards built around the 100 mW ZigBee ZMN2430HPA module), 2 AC power adapters and cords, 2 patch antennas, 2 USB cables, 2 Serial cables, 2 RF cables, 2 omni antennas, 2 9 V batteries, 1 Software CD $299.00
    ZMN24HPDK-B 2.4 GHz Contains: 1 serial / sensor evaluation board configured as a Router, 1 ZN-241Z serial radio modem built around the ZigBee ZMN2405HP module configured as a Coordinator, 1 patch antenna, 1 USB cable, 2 Serial cables, 1 RF cable, 2 omni antennas, 1 9 V battery, 1 Software CD $199.00
    Register Your Dev Kit
    Complete this form to receive
    free developer kit tech support
    First Name Last Name
    Company Name
    Email Address Phone
    State (if in USA or Canada):
    Country
    Developer Kit
    Comments: